BMSB Season 2020-21

Stay on top of the latest BMSB developments

If you are importing materials, machinery or tools into Australia, chances are high your cargo is classified as target high risk or target risk goods and subject to BMSB measures. As an importer or manufacturer whose business depends on a reliable supply chain, you cannot afford the risk of your much needed cargo being delayed or even rejected and exported.

Harders Advisory is in permanent contact with the Department of Agriculture, Water and the Environment (DAWE) and can ensure that your cargo will comply with DAWE’s latest rules and regulations. We classify goods, arrange for the required treatment by approved treatment providers, and take care of the required paperwork and documentation. As a result, you can fully focus on your business and your customers, rather than spending your time trying to stay on top of the latest BMSB developments and regulations.

Page updated: September 1, 2020

Don’t let a small bug stop your business. 

Resources

Comprehensive BMSB 2020-2021 fact sheet

BMSB Measures

In response to the rapid expansion of BMSB throughout Europe and North America, the Department of Agriculture, Water and the Environment (DAWE) has strengthened the seasonal measures to manage risk of BMSB from arriving in Australia for the 2020–21 BMSB risk season.

For the 2020-21 BMSB risk season, measures will apply to:

  • certain goods manufactured in, or shipped from target risk countries, and/or
  • vessels that berth at, load or tranship from target risk countries

from 1 September 2020 and that arrive in Australian territory by 31 May 2021 (inclusive).

As with previous BMSB risk seasons, Importers/Exporters must comply with these measures. Throughout the season the DAWE will continue to review these measures based on detections of BMSB and the risk pathways and make any necessary adjustments.

Brown Marmorated Stink Bug

(Halyomorpha Halys)

Brown Marmorated Stink Bugs pose a significant biosecurity risk to Australia due to their highly mobile nature. They are currently found throughout North East Asia, North America and Europe and can be identified by their shield shape and white bands on the antennae, legs and rear margins of the body. Introduction into Australia would have a devasting impact on over 300 agricultural and ornamental plants by rendering them unsellable or reducing production yields.

As a result, the Department of Agriculture, Water and the Environment (DAWE) implements seasonal measures for certain goods arriving from target risk countries.

Goods shipped from 1st September 2020 to 30th April 2021 need to be treated, and will be referred for intervention if the arrive in Australian territory by 31st May 2021. Throughout the season DAWE continually reviews measures based on detections of BMSB and the risk pathways.

Which goods are targeted?

Certain target high risk goods (Appendix 1) manufactured in, or shipped from target risk countries as sea cargo will require treatment for BMSB either prior to export or on arrival in Australia.

  • Break Bulk cargo, and cargo shipped in containers without six solid sides (Open Tops and Flat Racks) must be treated offshore before export.
  • Containerised (FCL/FCX) cargo arriving in sealed six hard sided containers may be treated offshore or onshore at the container level.
  • LCL and FAK containers with target high risk goods will be managed at the container level for BMSB.
    • Offshore treatment of LCL consignments and FAK containers is
      preferred.
    • Onshore treatment of LCL consignments and FAK containers will
      be permitted at the container level only.

Certain target risk goods (Appendix 1) do not require mandatory treatment however are subject to increased surveillance and inspections and may be directed for treatment if BMSB are detected.

All imported cargo must still comply with listed standard import conditions which are dealt with against the import declaration.

Treatment Options

There are three approved treatment options for BMSB treatments.

Heat

For all goods types and sizes

  • 56°C or higher at the coldest surface of the goods, for a minimum of 30 minutes, or Alternative option for individual goods weighing less than 3000 kg shipped as break bulk only
  • 60°C or higher at the coldest surface of the goods, for a minimum of 10 minutes


Note:
Individual goods shipped as break bulk weighing less than 3000kg treated at 60°C for 10 minutes require evidence within shipping documentation that they are less than 3000kg for these treatments to be accepted.

Methyl Bromide
  • A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), with a minimum end point reading of 12 g/m³, or
  • A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, with a minimum end point reading of 8 g/m³


Note:
Dose increases to compensate for temperatures less than 10°C is NOT permitted.

Sulfuryl Fluoride
  • A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), with a minimum end point reading of 12 g/m³, or
  • A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, with a minimum end point reading of 8 g/m³


Note:
Dose increases to compensate for temperatures less than 10°C is NOT permitted.

Sulfuryl Fluoride – Using third-party system*
  • Achieve a CT of 200 g-h/m³ or more, at 10°c or above, for 12 hours or longer, with a minimum end point reading of 12 g/m³, or
  • Achieve a CT of 200 g-h/m³ or more, at 10°C or above, for 24 hours or longer, with a minimum end point reading of 8 g/m³


Note:
 The approved third party systems are:

  • Douglas Products FumiGuide
  • Ensystex II, Inc. Fumicalc

Offshore BMSB Treatment Providers Scheme

The list of currently approved treatment providers for the 2020-2021 season is available here.

The list will be updated by the Department of Agriculture with new providers and details of any suspensions. It is recommended to regularly check the list to ensure any preferred treatment provider used is still approved for the treatment method chosen.

Treatment Window

Goods shipped in a six hard sided container (FCL, FCX, LCL or FAK) must be packed and sealed in the container within 120 hours (5 days) of the treatment being completed.

Goods shipped as Break Bulk or in open top or flat rack containers must be loaded on board a vessel for export within 120 hours (5 days) of the treatment being completed.

Vessels

All roll-on roll-off (ro-ro) vessels that berth at, load or tranship in target risk countries from 1st September 2020 and arrive in Australian territory by 31st May 2021 will be required to:

> Conduct self-inspections and respond to specific questions as part of pre-arrival reporting requirements; and
> Undergo a mandatory seasonal pest inspection on arrival in Australia.

Target Risk Countries*

The rapid expansion of BMSB throughout Europe and North America has seen the list of Target Risk Countries grow to 36, up from the 9 countries in 2018-19.

Albania
Georgia
Portugal
Andorra
North Macedonia
Romania
Armenia
Germany
Russia
Austria
Greece
Serbia
Azerbaijan
Hungary
Slovakia
Belgium
Italy
Slovenia
Bosnia and Herzegovina
Kazakhstan
Spain
Bulgaria
Kosovo
Switzerland
Canada
Liechtenstein
Turkey
Croatia
Luxembourg
Ukraine
Czechia
Moldova
United States of America
France
Montenegro
Netherlands
Japan (heightened vessel surveillance will be the only measure applied)

The Department of Agriculture, Water and the Environment will be monitoring a number of emerging risk countries throughout the season and may conduct random onshore inspections of consignments of target high risk and target risk goods to verify freedom from BMSB contamination.

*New countries added in July and August 2020: Moldova, Portugal, Ukraine, Kazakhstan

Safeguarding Arrangements

As part of the 2020-21 measures, DAWE has made the Safeguarding Arrangements Scheme available to importers. The scheme recognises the ability of approved participants to manage BMSB risk offshore, from the point of manufacture to the point of export.

Safeguarding Arrangements are only available to participants that meet the following eligibility criteria:

  • Hold a valid Australian Business Number;
  • Import a minimum of 5000 vehicles/units per season via break bulk, AND/OR;
  • Import a minimum of 50 x 20’ FCL AND/OR 25 x 40’ FCL per season.

Applications from qualifying stakeholders should be lodged with DAWE.  For further information please contact Henning Harders.

offshore, including seasonal pests such as BMSB, from the point of manufacture to the point of embarkation.

A trial by invitation of select industry participants will be conducted before being opened to wider industry.

More information will follow as it becomes available.

New, unused and not field tested (NUFT) goods

The Department will permit certain goods (classified under chapters 82, 84, 85, 86, 87, 88 and 89) manufactured on or after 1st December 2020, and that can meet NUFT criteria to be exempt from BMSB measures under certain conditions.

Importations of these commodities must include supporting documentation to prove the manufacture date and evidence of its NUFT status.

Any questions or queries relating to the 2020-21 measures can be directed to Harders Advisory as per below.

For any questions or queries relating to the 2020-21 measures please contact the Harders Advisory team or your Henning Harders Key Account Manager.

Appendix

Target High Risk Goods

  • 36 - Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations
  • 44 - Wood and articles of wood; wood charcoal
  • 45 - Cork and articles of cork
  • 57 - Carpets and other textile floor coverings
  • 68 - Articles of stone, plaster, cement, asbestos, mica or similar materials
  • 69 - Ceramic products – including sub chapters I and II
  • 70 - Glass and glass ware
  • 72 - Iron and steel - including sub chapters I, II, III, IV
  • 73 - Articles of iron or steel
  • 74 - Copper and articles thereof
  • 75 - Nickel and articles thereof
  • 76 - Aluminium and articles thereof
  • 78 - Lead and articles thereof
  • 79 - Zinc and articles thereof
  • 80 - Tin and articles thereof
  • 81 - Other base metals; cermets; articles thereof
  • 82 - Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
  • 83 - Miscellaneous articles of base metals
  • 84 - Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
  • 85 - Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
  • 86 - Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds
  • 87 - Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof
  • 88 - Aircraft, spacecraft, and parts thereof
  • 89 - Ships, boats and floating structures
  • 93 - Arms and ammunition; parts and accessories thereof

Target Risk Goods

  • 25 - Salt; sulphur; earths and stone; plastering materials, lime and cement
  • 26 - Ores, slag and ash
  • 27 - Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
  • 28 - Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes - including sub chapters I, II, III, IV and V
  • 29 - Organic chemicals - including sub chapters I, II, III, IV, V, VI, VII, VIII, IX, X, XII and X11131 - Fertilisers
  • 38 - Miscellaneous chemical products
  • 39 - Plastics and articles thereof - including sub chapters I and II
  • 40 - Rubber and articles thereof
  • 46 - Manufactures of straw, of esparto or of other plaiting materials; basket ware and wickerwork
  • 47 - Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard
  • 48 - Paper and paperboard; articles of paper pulp, of paper or of paperboard
  • 49 - Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans
  • 56 - Wadding, felt and nonwovens; special yarns; twine, cordage, ropes and cables and articles thereof

Page last updated: 23.8.2019

Your direct contact to Harders Advisory

Talk to us if you consider importing goods to Australia, if you want to determine the feasibility of an overseas business opportunity, mitigate risks, comply with customs regulations, improve cash-flow or streamline your import / export processes.

AUSTRALIA WIDE CONTACT

Steven Butler

Head of Advisory

Share this page

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on print